With the Flat Trim foot, you can easily add lace and trims to the
top of the fabric with a coverstitch to create beautiful decorative
edges and effects.

1. Set the machine for a Coverstitch wide.
2. Snap on the Flat Trim foot.
3. Use default stitch settings. Adjust if needed.
4. Insert the fabric edge into the lower section on the left side of the foot. Slide the fabric
under the foot and under the needles.
5. Insert the trim into the upper section on the right side of the foot. Slide the trim toward
the back of the foot beyond the needles, leaving a short tail of trim behind the needles.

Tip: Use tweezers to slide the fabric and the trim to the correct position under the
needles.
6. Lower the needles into the trim and the fabric. Lower the Flat Trim foot
7. As you sew, hold the fabric in your left hand and the trim in your right hand.

Tip: If you want a finished fabric edge, press a ¼” (6mm) hem to the right side of the
fabric before inserting the fabric into the Flat Trim foot. The lace will cover the fabric
raw edge when sewn in place.